AccessPORT - flashing map in ECU

Error message

  • Deprecated function: Optional parameter $path declared before required parameter $arg is implicitly treated as a required parameter in include_once() (line 1442 of /srv/www/d7/drupal-7.101/includes/bootstrap.inc).
  • Deprecated function: Optional parameter $type declared before required parameter $key is implicitly treated as a required parameter in include_once() (line 1442 of /srv/www/d7/drupal-7.101/includes/bootstrap.inc).
  • Deprecated function: Optional parameter $input declared before required parameter $form_state is implicitly treated as a required parameter in require_once() (line 12 of /srv/www/d7/sites/all/modules/media/media.module).
  • Deprecated function: Optional parameter $input declared before required parameter $form_state is implicitly treated as a required parameter in include_once() (line 1442 of /srv/www/d7/drupal-7.101/includes/bootstrap.inc).

After installation of COBB AccessPORT, you can change map in ECU. You need to connect device to OBD II port and choose Performance menu with use of up/down buttons, then press OK button to enter. Now you can select appropriate map and press OK to read description. At this point you can still witdhdraw by pressing Cancel. If you press OK selected map will be uploaded to ECU. This procedure will take about 3 minutes, and you CAN NOT turn the ignition off, open doors and disconnect device during this time, or vehicle can be immobilized.
You need to select right map for owned fuel and installed modifications. There are several maps prepared for various modifications and fuel, eg. Stage1 91, Stage1 93 +Int, Stage1 93 +Int+TIH. Maps described as Stage2 requires non-stock fuel pump (CDFP).
I chose Stage1 93, because I had 98 octane fuel[1] tanked and I have no modifications so far.

Annotations:
[1] - In the US octane rating is displayed in AKI. In Poland and most of Europe octane number is displayed in RON. 91 AKI = 95 RON, 93 AKI = 98 RON.[*]